NEW Smaller Profile Pull-Pull Wire Connectors
Pull-Pull Wire Tensioners
This kits includes 2) 1- 1/2 titanium turnbuckles, 2) RH #87 Ball links and 2) wire adapters. Connect up to your bellcrank and you have up to a 1/2" of adjustment. These wire adapters provide a nice round connection for your wire rope, so there is no kinking. Works great with Kevlar! Installation instructions included.
10' Pull-Pull Wire
This kits includes 10' Stainless Steel Nylon Coated #80 lbs Test and 5 crimps
Motor Mounts for 100cc ,120-150 cc &3W-157
120-150cc Aluminum Motor Mount 0°
This specially designed aluminum mount for DA or 3W 120cc-150cc motors used on models that have the right thrust built in and weighs less than 2 oz. These will save you a lot of time and effort. Machined from 6061-T6 with a 5/8 rise at the highest point . Just draw your horizontal and vertical center lines, then line up the cross hairs on the mount. There even is 4)- #4 holes so you can mount it to your firewall and use it as a drill fixture. 4)-1/4",4)-1/8" & 4)-1/16" boss extensions included.
120-150cc Aluminum Motor Mount 2-1/2 °
This specially designed aluminum mount for DA or 3W 120cc-150cc motors and weight less than 2 oz. These will save you a lot of time and effort. Machined from 6061-T6 with a 5/8 rise at the highest point and 2-1/2° machined right into the mount. Just draw your horizontal and vertical center lines, then draw your offset vertical line (11/32 typical left side of plane) line up the cross hairs on the mount. There even is 4)- #4 holes so you can mount it to your firewall and use it as a drill fixture. 4)-1/4",4)-1/8" & 4)-1/16" boss extensions included.
120-150cc Aluminum Motor Mount 3 °
This specially designed aluminum mount for DA or 3W 120cc-150cc motors and weight less than 2 oz. These will save you a lot of time and effort. Machined from 6061-T6 with a 5/8 rise at the highest point and 3° machined right into the mount. Just draw your horizontal and vertical center lines, then draw your offset vertical line (7/16" typical left side of plane) line up the cross hairs on the mount. There even is 4)- #4 holes so you can mount it to your firewall and use it as a drill fixture. 4)-1/4",4)-1/8" & 4)-1/16" boss extensions included.
120-150cc Aluminum Motor Mount 3 1/2°
This specially designed aluminum mount for DA or 3W 120cc-150cc motors and weight less than 2 oz. These will save you a lot of time and effort. Machined from 6061-T6 with a 5/8 rise at the highest point and 3-1/2° machined right into the mount. Just draw your horizontal and vertical center lines, then draw your offset vertical line (1/2 typical left side of plane) line up the cross hairs on the mount. There even is 4)- #4 holes so you can mount it to your firewall and use it as a drill fixture. 4)-1/4",4)-1/8" & 4)-1/16" boss extensions included.
3W 157cc Aluminum Motor Mount 0°
This specially designed aluminum mount for 3W 157cc motors used on models that have the right thrust built in and weighs less than 2 oz. These will save you a lot of time and effort. Machined from 6061-T6 with a 5/8 rise at the highest point . Just draw your horizontal and vertical center lines, then line up the cross hairs on the mount. There even is 4)- #4 holes so you can mount it to your firewall and use it as a drill fixture. 4)-1/4",4)-1/8" & 4)-1/16" boss extensions included.
3W 157cc Aluminum Motor Mount 2-1/2°
This specially designed aluminum mount for 3W 157cc motors and weight less than 2 oz. These will save you a lot of time and effort. Machined from 6061-T6 with a 5/8 rise at the highest point and 2-1/2° machined right into the mount. Just draw your horizontal and vertical center lines, then draw your offset vertical line (5/16 typical left side of plane) line up the cross hairs on the mount. There even is 4)- #4 holes so you can mount it to your firewall and use it as a drill fixture. 4)-1/4",4)-1/8" & 4)-1/16" boss extensions included.
3W 157cc Aluminum Motor Mount 3°
This specially designed aluminum mount for 3W 157cc motors and weight less than 2 oz. These will save you a lot of time and effort. Machined from 6061-T6 with a 5/8 rise at the highest point and 3° machined right into the mount. Just draw your horizontal and vertical center lines, then draw your offset vertical line (5/16 typical left side of plane) line up the cross hairs on the mount. There even is 4)- #4 holes so you can mount it to your firewall and use it as a drill fixture. 4)-1/4",4)-1/8" & 4)-1/16" boss extensions included.
3W 157cc Aluminum Motor Mount 3-1/2°
This specially designed aluminum mount for 3W 157cc motors and weight less than 2 oz. These will save you a lot of time and effort. Machined from 6061-T6 with a 5/8 rise at the highest point and 3-1/2° machined right into the mount. Just draw your horizontal and vertical center lines, then draw your offset vertical line (5/16 typical left side of plane) line up the cross hairs on the mount. There even is 4)- #4 holes so you can mount it to your firewall and use it as a drill fixture. 4)-1/4",4)-1/8" & 4)-1/16" boss extensions included.
100cc Aluminum Motor Mount 0°
This specially designed aluminum mount for 100 CC motors used on models that have the right thrust built in and weighs less than 2 oz. These will save you a lot of time and effort. Machined from 6061-T6 with a 3/8 rise at the highest point . Just draw your horizontal and vertical center lines, then line up the cross hairs on the mount. There even is 4)- #4 holes so you can mount it to your firewall and use it as a drill fixture. 4)-1/4",4)-1/8" & 4)-1/16" boss extensions included.
100cc Aluminum Motor Mount 2-1/2°
This specially designed aluminum mount for DA or 3W 100cc motors and weight less than 2 oz. These will save you a lot of time and effort. Machined from 6061-T6 with a 3/8 rise at the highest point and 2-1/2° machined right into the mount. Just draw your horizontal and vertical center lines, then draw your offset vertical line (5/16 typical left side of plane) line up the cross hairs on the mount. There even is 4)- #4 holes so you can mount it to your firewall and use it as a drill fixture. 4)-1/4",4)-1/8" & 4)-1/16" boss extensions included.
